Push Pro: Installer Mode

Installer mode enables you to pair and adjust various settings, bypassing the usual step-by-step on screen instructions.

Press the Menu button and select Settings by pressing the Enter button.

On the Remote Settings screen, Select Installer Mode. 

To exit Installer Mode, press the Back button.

In Installer mode, the menu button is replaced by the P2 button, which is typically used for programming and setup. Here’s a general outline of what the P2 button is used for.

1. Programming Limits: Setting the upper and lower limits for the blinds.

2. Pairing and Unpairing Shades: Associating the remote with specific motorized blinds or removing the association.

3. Shade Settings: Adjusting various settings for your shades.