Surface Wall Mount Switches
The Surface Mount wall switch is designed to deliver simple, intuitive shade control through a flexible mounting solution. A magnetic wall clip allows the switch to be easily removed or secured in place with a secure mount, enabling adaptable installation for different project requirements. A five-channel configuration supports control of individual or grouped shades, while a clear up, down, and stop interface with dedicated channel buttons ensures straightforward operation.
Products
| Name | Pack | Finishes | |
|---|---|---|---|
 | AUTOMATE | Surface Mount Wall Switch – 5Ch | 1 | 120 each | |
Specifications
Surface Mount Wall Switch
| Attribute | Value |
|---|---|
| IP Rating | 4X |
| Legacy Option | NO |
| Operating Temperature | -10°C to 50°C |
| Radio Frequency | 433.92 MHz |
| RF Modulation | FSK |
| Transmission Distance | 20 Meters typical (Up to 100 Meters unobstructed) |
| Transmitting Power | 10 milliwatt |
| Voltage | 3V (CR2450) |
Features
Five Channels
Activate shades individually or within customised groups with five programmable channels.
Magnetic Backing Plate
Install using the magnetic backing plate to use the control panel as a removable remote
Fixed Backing Plate
Install using the secure backing plate to use the control panel as a fixed wall switch.
Simple Wall Attachment
Screws directly to the surface of the wall with no wiring or cutting required and is compatible with any Automate system.
Support
Knowledge Base
What Battery Goes Into My Remote?
User GuideProduct Guides
Remote (P2) Button Locations and Functions
The P2 button is a programming button located on every remote. Typically, it is found on the back of the remote, under the battery cover. Refer to the images below for the P2 location on different control devices
Product GuidesUser GuideProgramming Instructions
Automate
Quiet, efficient and reliable motorisation products for window furnishings.
