Pulse PRO: Ethernet Setup [iPhone and Android]
Wi-Fi can also be setup as a backup connection during Ethernet setup.
How do I set up a Pulse PRO using Ethernet?
1. Connect the Automate Pulse PRO to your router using the provided Ethernet cable
2. Plug in the power and ensure the Pulse PRO is blinking blue.
Not blinking blue? More info...
Hold the P button until the Hub's light turns solid green, then let go. After a moment the Hub should begin blinking blue.
3. Open the Automate app and select Connect from the Pulse PRO Detected pop-up.
Not seeing a pop-up? More info...
Ensure that all app permissions are enabled under the app settings. Then close and re-open the app.
The steps for each platform are below.
iOS Settings
- Open the Settings app.
- Scroll down and select the Apps section.
- Search for and select the AUTOMATE app.
- Ensure that all settings are turned on. (Location, Bluetooth, Local Network, Home Data, and Cellular Data if available)
Android Settings
- Open the Settings app.
- Scroll down and select the Apps section.
- Search for and select the AUTOMATE app.
- Select Permissions.
- Ensure that all permissions are allowed. (Location and Bluetooth)
4. Select Next to setup Wi-Fi as a backup connection.
Note: If a Wi-Fi connection is not needed, then toggle Enable Wi-Fi off and skip to step #6.
5. Select Next to setup Wi-Fi as a backup connection.
Ensure that you are connected to a 2.4 GHz compatible Wi-Fi network.
6. Wait while your Pulse PRO connects to your network.
7. The Pulse PRO is now online and ready to be paired with your shades.
For more information on pairing shades with your Pulse PRO, see Pairing Shades & Creating Rooms.
Need help?
Contact technical support for assistance between 8:30am – 5pm AEST.
